dmesg - Radeon RX 550
Linux version 4.15.0-999-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801162100 SMP Wed Jan 17 02:02:09 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
random: get_random_u32 called from bsp_init_amd+0x1d3/0x220 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bd43dfff] usable
BIOS-e820: [mem 0x00000000bd43e000-0x00000000bd46dfff] reserved
BIOS-e820: [mem 0x00000000bd46e000-0x00000000bd4a1fff] usable
BIOS-e820: [mem 0x00000000bd4a2000-0x00000000bd559fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd55a000-0x00000000bda13fff] reserved
BIOS-e820: [mem 0x00000000bda14000-0x00000000bda5bfff] type 20
BIOS-e820: [mem 0x00000000bda5c000-0x00000000bda5cfff] usable
BIOS-e820: [mem 0x00000000bda5d000-0x00000000bdc62fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdc63000-0x00000000bddb9fff] usable
BIOS-e820: [mem 0x00000000bddba000-0x00000000be949fff] reserved
BIOS-e820: [mem 0x00000000be94a000-0x00000000be97ffff] usable
BIOS-e820: [mem 0x00000000be980000-0x00000000beff0fff] reserved
BIOS-e820: [mem 0x00000000beff1000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xbd524000 ACPI 2.0=0xbd524000 SMBIOS=0xf04d0 MPS=0xfd560
random: fast init done
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A58M-VG3+ R2.0, BIOS P2.70 01/11/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x08139000, 0x08139fff] PGTABLE
BRK [0x0813a000, 0x0813afff] PGTABLE
BRK [0x0813b000, 0x0813bfff] PGTABLE
BRK [0x0813c000, 0x0813cfff] PGTABLE
BRK [0x0813d000, 0x0813dfff] PGTABLE
BRK [0x0813e000, 0x0813efff] PGTABLE
BRK [0x0813f000, 0x0813ffff] PGTABLE
BRK [0x08140000, 0x08140fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x31b71000-0x34daffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BD524000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD524090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD52A668 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000BD5241C0 0064A4 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BD550F80 000040
ACPI: APIC 0x00000000BD52A778 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BD52A7F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000BD52A840 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD52A8E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD52A920 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x00000000BD52A958 0002D4 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000BD52AC30 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BGRT 0x00000000BD52AC78 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BD52ACB0 000542 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BD52B1F8 000346 (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000BD52B540 0002E8 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BD52B828 0016E4 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BD52CF10 000ABB (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BD52D9D0 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23ffd3000-0x23fffdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bd43dfff]
node 0: [mem 0x00000000bd46e000-0x00000000bd4a1fff]
node 0: [mem 0x00000000bda5c000-0x00000000bda5cfff]
node 0: [mem 0x00000000bdc63000-0x00000000bddb9fff]
node 0: [mem 0x00000000be94a000-0x00000000be97ffff]
node 0: [mem 0x00000000beff1000-0x00000000beffffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2086318
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12057 pages used for memmap
DMA32 zone: 771599 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd43e000-0xbd46dfff]
PM: Registered nosave memory: [mem 0xbd4a2000-0xbd559fff]
PM: Registered nosave memory: [mem 0xbd55a000-0xbda13fff]
PM: Registered nosave memory: [mem 0xbda14000-0xbda5bfff]
PM: Registered nosave memory: [mem 0xbda5d000-0xbdc62fff]
PM: Registered nosave memory: [mem 0xbddba000-0xbe949fff]
PM: Registered nosave memory: [mem 0xbe980000-0xbeff0fff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2053692
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7859812K/8345272K available (12300K kernel code, 2469K rwdata, 4192K rodata, 2384K init, 2416K bss, 485460K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 39015 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 6 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3892.887 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7785.77 BogoMIPS (lpj=15571548)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 mitigation: Vulnerable: Minimal AMD ASM retpoline
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD A6-7400K Radeon R5, 6 Compute Cores 2C+4G (family: 0x15, model: 0x30, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (15571.54 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbd4a2000-0xbd559fff] (753664 bytes)
PM: Registering ACPI NVS region [mem 0xbda5d000-0xbdc62fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:29:52, date: 01/18/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1516285792.036:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: enabling Extended Tags
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb09000-0xfeb097ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb05000-0xfeb050ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb04000-0xfeb04fff]
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:699f] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 0: assigned to efifb
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbd43e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd4a2000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbda5d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbddba000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe980000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:03: resource 11 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.2: PME# does not work under D3, disabling it
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 51452K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xac7e5000-0xb07e5000] (64MB) mapped at [000000004e0682e4-00000000e0d64999]
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.1: Signaling PME with IRQ 24
pcieport 0000:00:03.1: Signaling PME with IRQ 25
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb07000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb05000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb08000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.15.0-999-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb06000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.15.0-999-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb04000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.15.0-999-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1019499316, 0)->(1103841706, -84342390)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c8ca51c63cba7f6c93d361a1ac0f27e833a35419'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 2:731:485
rtc_cmos 00:05: setting system clock to 2018-01-18 14:29:53 UTC (1516285793)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2384K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1952K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:04: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input2
usb 1-3: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb09000 port 0xfeb09100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xfeb09000 port 0xfeb09180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xfeb09000 port 0xfeb09200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xfeb09000 port 0xfeb09280 irq 26
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x000000000578504a, d0:50:99:59:af:ae, XID 0c000800 IRQ 28
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:02:00.0 enp2s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=744
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=2 id_base=16
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1458:0x22F2 0xC7).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] probing mlw for device 1022:1425 = 733d03
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
No Local Variables are initialized for Method [ATC0]
No Arguments are initialized for method [ATC0]
ACPI Error: Method parse/execution failed \_SB.PCI0.PB21.VGA.ATC0, AE_NOT_FOUND (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB21.VGA.ATCS, AE_NOT_FOUND (20170831/psparse-550)
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: xxx-xxx-xxx
[drm] GPU post is not needed
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 4061660 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris12_pfp_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris12_me_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris12_ce_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris12_mec_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris12_mec2_2.bin failed with error -2
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x00000000e950d445
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x00000000590e3351
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x000000003dbc3438
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x00000000ccb6c3bb
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x000000008f34fad3
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x000000002af18549
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x00000000005fde80
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x0000000043385bf9
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x0000000010f223e7
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x000000004e9accb7
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x0000000011673955
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x000000001b4a0da1
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x000000f4001e6420, cpu addr 0x0000000008fde5ff
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x000000007377f3c7
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x00000000f4839938
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x000000006cde1861
amdgpu 0000:01:00.0: fence driver on ring 16 use gpu addr 0x0000000000400860, cpu addr 0x000000003f350c85
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 21400
[drm] DM_PPLIB: 55100
[drm] DM_PPLIB: 73400
[drm] DM_PPLIB: 98000
[drm] DM_PPLIB: 104600
[drm] DM_PPLIB: 109800
[drm] DM_PPLIB: 112400
[drm] DM_PPLIB: 120600
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing engine clock level from 8 to 2
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 62500
[drm] DM_PPLIB: 175000
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing memory clock level from 3 to 2
[drm] DC: create_links: connectors_num: physical:3, virtual:0
usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB 2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
[drm] Display Core initialized!
[drm] Rx Caps:
[drm] HBR2x4 pass VS=2, PE=1
[drm] Acer B286HK: [Block 0]
[drm] Acer B286HK: [Block 1]
[drm] dc_link_detect: manufacturer_id = 7204, product_id = 3FF, serial_number = 4410C13B, manufacture_week = 41, manufacture_year = 24, display_name = Acer B286HK, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
ata6.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[drm] ring test on 0 succeeded in 17 usecs
[drm] ring test on 9 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 11 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 12 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 7 usecs
[drm] ring test on 11 succeeded in 7 usecs
ata6.00: limited to UDMA/33 due to 40-wire cable
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/33
[drm] ring test on 12 succeeded in 1 usecs
[drm] ring test on 13 succeeded in 813 usecs
[drm] ring test on 14 succeeded in 4 usecs
[drm] UVD and UVD ENC initialized successfully.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 15 succeeded in 6 usecs
[drm] ring test on 16 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] ib test on ring 14 succeeded
[drm] ib test on ring 15 succeeded
[drm] fb mappable at 0xC03F2000
[drm] vram apper at 0xC0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
Console: switching to colour frame buffer device 480x135
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
No Local Variables are initialized for Method [ATC0]
No Arguments are initialized for method [ATC0]
ACPI Error: Method parse/execution failed \_SB.PCI0.PB21.VGA.ATC0, AE_NOT_FOUND (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB21.VGA.ATCS, AE_NOT_FOUND (20170831/psparse-550)
amdgpu 0000:01:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 0
usb 1-3.4: new high-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: OCZ-VECTOR150, 1.2, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VECTOR150 1.2 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: Attached scsi generic sg1 type 0
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] supports TCG Opal
sd 5:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-3.4: New USB device found, idVendor=2109, idProduct=2811
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4: Product: USB2.0 Hub
usb 1-3.4: Manufacturer: VIA Labs, Inc.
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3892.920 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x703a73a17b4, max_idle_ns: 881590462231 ns
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
usb 1-3.4.3: new full-speed USB device number 4 using ehci-pci
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Syslog Socket.
usb 1-3.4.3: New USB device found, idVendor=1532, idProduct=0043
usb 1-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.3: Product: Razer DeathAdder Chroma
usb 1-3.4.3: Manufacturer: Razer
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[253]: Received request to flush runtime journal from PID 1
usb 1-3.4.4: new low-speed USB device number 5 using ehci-pci
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 1-3.4.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.4: Product: USB Keyboard
usb 1-3.4.4: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input3
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input7
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
clocksource: Switched to clocksource tsc
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/0003:1532:0043.0001/input/input11
hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:12.2-3.4.3/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.1/0003:1532:0043.0002/input/input12
hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:12.2-3.4.3/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.2/0003:1532:0043.0003/input/input13
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:12.2-3.4.3/input2
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4:1.0/0003:04F2:0833.0004/input/input14
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:12.2-3.4.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4.4/1-3.4.4:1.1/0003:04F2:0833.0005/input/input15
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:12.2-3.4.4/input1
audit: type=1400 audit(1516285796.221:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1516285796.221:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1516285796.221:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1516285796.221:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
audit: type=1400 audit(1516285796.221:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=521 comm="apparmor_parser"
audit: type=1400 audit(1516285796.221:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=521 comm="apparmor_parser"
audit: type=1400 audit(1516285796.225:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=525 comm="apparmor_parser"
audit: type=1400 audit(1516285796.225:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=526 comm="apparmor_parser"
audit: type=1400 audit(1516285796.233:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=527 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
random: crng init done
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
EXT4-fs (sdb): recovery complete
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[drm] {1920x1080, 2200x1125@148500Khz}